Apr 142011
 

In the morning I replaced the crashed computer by an other one and made it running with wsjt and tested it it txed the tranceiver. After I came home from qrl at 2330 local I inmediately fired up everything and after calling in the big pile up I finaly worked PJ2/PE1L for dxcc 102 via the moon.

Apr 132011
 

Today it was one of those days everything goes wrong. When I came home (late) from QRL I looked to the SteppIr antenna and saw that there was something wrong with the position of one element. (2 Fiber poles). When I looked better I could see that the boots who hold the fiber poles in place where broken! This has to be repaired in the coming days otherwise the element will come down.
Later in the evening I started up the moonbounce station to work PJ2/PE1L via the moon. I saw very strange noise all over the screen and of course exactly on 144114 where the DXpedition was transmitting. After disconnecting my Internet switches from power problems where not over yet. I switched off both computers with the power button on the front off the PC and noise was gone. Maybe this was not a good action because the main PC would not start up again. Windows-xp was crashed. I decided that it was enough for this day.

Apr 102011
 

Today I worked on 144 MHz moonbounce DXCC #101Hl5QO.

 

 

Apr 092011
 

Worked PJ4X for 144 MHz DXCC#100.
Thanks to Jurgen PE1LWT, Johan PA3FPQ, Rene PE1L and Peter PJ4NX.

Apr 062011
 

Today I fired up the eme system to see if it is still working. Tomorrow PJ4X (Bonaire) will be active on the moon and I want to work them for a new dxcc. When I tested the system there was suprise. 9N7WL was there with a good signal. Thats a new dxcc for me on 144Mhz.