Nov 212012

Today I went up the tower to switch the six meter system from two coax lines to one coax line.
I thought I could do this job in about 15 minutes. At the end it took me more as two hours. I tried to loosen the coax which is going to the six meter yagi from the relay box but there was no movement at all I went down to the shack to get more tools. I tried hard but still no movement . Then I decided to remove the swivel form the connector and pull the coax out and mount a new connector. So I did.  After that I already was cold and decided to finish the job and remove the preamp and the relay box today. The only two things still up there now are the revive line. I taped it well and I can use this one for the new 7oMHz yagi which I will put up there in spring next year as I remove the C31XR HF yagi which will go to a new tower.  The 12v switching cable. is also there but taped it also and will remove it in spring.